Radna platforma poluprikolica

FAYMONVILLE MAX Trailer MAX210 Telesattel

Extract from the equipment. Complete equipment on request.

Loading area
Loading area in double extendable version with pneumatically operated locking
* A fixed intermediate table approx. 250 mm wide is mounted on the middle support
* 8 pairs of lashing rings that can be folded outwards (LC 5,000 daN).
* 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN)

Axles
BPW axles and suspension, all axles hydro-mechanically forced steered
* With disc brakes
* Technical axle load: 10,000 kg each (ET 0)
* Air suspension with lifting and lowering valve
* Axle tool.

Tires
* Tires 385/65 R 22.5

Seatposts
JOST seatposts (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)

Braking system
Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Warning signs
On the gooseneck and on the rear panel on the left and right, a bracket for the warning signs, including a socket

Steel construction
Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Lelhccqovcviusnehd

Paintwork
First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
* A high-quality 2 Components (2K) Top coat in a single color in RAL 3002 carmine red
* Rims in silver
* Attachments of the manufacturer’s choice
* Rear section metallized and painted in RAL 9010 (pure white)

Incl. the following additional equipment
2 inch kingpin
* Electro-hydraulic unit
* Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, (without installation in the tractor unit)
* Yellow-red air couplings on the galvanized connection strip at the front
* A bracket for a rotating beacon at the rear of the trailer
* Loading area with approx. 30 mm thick wooden floor framed in omega profiles
* 10 pairs of stake pockets for stakes approx. 100 x 50 mm in the outer frame of the loading area
* 1 spare wheel holder under the loading area on the right in the direction of travel
* Load pressure gauge for determining the axle loads including load diagram
* A galvanized Steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' container or 1 x 40' container
* An additional locking point is provided in the extension for a 45' container
* 5 pairs of stake pocket strips mounted across the loading area, for plug-in stakes 100 x 50 mm
* Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
* Access ladder mounted on the left and right in the direction of travel
* One INOX tool box, approx. 1,200 x 460 x 550 mm, at the front under the loading area on the left in the direction of travel
* One INOX tool box, approx. 1,200 x 460 x 550 mm, under the loading area on the right in the direction of travel
* Spiral cable for supplying the electro-hydraulic unit (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with plug connection (NATO-NATO)
* Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and removable protection around the pump
* Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position

Reklama je automatski prevedena i došlo je do nekih grešaka prilikom prevoda.